Advanced, multi-material designs with a lightweight face-sole core milled from aircraft-grade aluminum surrounded by a solid 303 stainless steel frame.
from the precision milled steel frame integrated with the lightweight aluminum face-sole core produces high MOI and delivers stability throughout the stroke.
at impact is aided by the 303 stainless steel customizable heel and toe weights integrated into the face-sole core.
and full topline visibility from the stepless, single bend shaft on GOLO 5, 5R, 6 and a stepless, flow neck shaft on GOLO 3.
shaft with 9° forward and 3° inward lean aligns the portion of the shaft below the bend directly down the target line (GOLO 5, 5R and 6).
is achieved by the seamless integration of the aluminum core and steel frame using internal vibration dampeners in five strategic locations.
from the shaft bend, offset, and contrasting dark anodized face and pop-through flange sightline field.
Mid mallet with a heel shafted flow neck.
Angled back mallet with a crisp single bend shaft.
Rounded back mallet with a crisp single bend shaft.
B back mallet with a crisp single bend shaft.
A modern mallet design with a heavier 50-gram head with an additional 50-gram weight in the butt end of the shaft.
|MODEL||LOFT||LIE||RH/LH||LENGTHS||NECK||TOE FLOW||OFFSET||STOCK GRIP|
|GOLO 3||3.5°||70°||RH||33", 34", 35"||Flow||Maximum||3/4 Shaft||Matador Mid|
|GOLO 5||3.5°||70°||RH/LH||33", 34", 35"||Crisp Single Bend||Near Minimum||Full Shaft||Matador Mid|
|GOLO 5R||3.5°||70°||RH||33", 34", 35"||Crisp Single Bend||Near Minimum||Full Shaft||Matador Mid|
|GOLO 6||3.5°||70°||RH||33", 34", 35"||Crisp Single Bend||Near Minimum||Full Shaft||Matador Mid|
|GOLO 5 DB||3.5°||70°||RH/LH||38"||Crisp Single Bend||Minimum||Full Shaft||Dual Balance|