TSi3 CG track & surefit hosel screws

RE: TSi3 CG track & surefit hosel screws

KONeill — Tue, 24 Aug 2021 02:44:38 GMT

I just got a TSI3 head and have been messing with the track on the back as well as a lot of others and I had a little silver bushing pop out of the screw slot while moving the cg track weight around and I'm not sure why that popped out? Is this under warranty?

RE: TSi3 CG track & surefit hosel screws

KONeill — Tue, 24 Aug 2021 02:44:02 GMT

RE: TSi3 CG track & surefit hosel screws

jeff p — Tue, 15 Jun 2021 14:04:05 GMT

The clubhead has been replaced and the new one has the same issue. I went to a local retailer who had 2 new clubs on their display, both still in the plastic and unhit, and they both had the problem as well. The club is the TSi3 #2 hybrid, and that's the only specs I have checked out. It's poorly designed.

RE: TSi3 CG track & surefit hosel screws

JReeter — Sun, 11 Apr 2021 15:07:59 GMT

Contact your local Titleist dealer, it should be covered under warranty IF there’s a valid problem. Don’t tinker with it you might compound the problem.

RE: TSi3 CG track & surefit hosel screws

jeff p — Fri, 09 Apr 2021 20:58:10 GMT

[quote user="Zarni H"]could it be that there is debris stuck somewhere inside? I don't have hybrids so I cant really comment on the latter. Hope u get it fixed soon!

[/quote]

It is the screw that secures the plate over the weight. Unfortunately the screw is incased in the plate. No other solution other than a new head. I've hit less that 10 balls with it and now Titleist says it will be 2-3 weeks for a replacement. Not very happy about that.

RE: TSi3 CG track & surefit hosel screws

jeff p — Wed, 07 Apr 2021 16:02:46 GMT

[quote user="Zarni H"]could it be that there is debris stuck somewhere inside? I don't have hybrids so I cant really comment on the latter. Hope u get it fixed soon!

[/quote]

I really don't think that's the issue. 99% sure it's the weight. I just need to figure out how to remove it.

RE: TSi3 CG track & surefit hosel screws

Zarni H — Wed, 07 Apr 2021 13:21:16 GMT

yup i made sure of that, but noticed the edges started to wear very quickly throughout. my fitting session

RE: TSi3 CG track & surefit hosel screws

Zarni H — Wed, 07 Apr 2021 13:20:11 GMT

could it be that there is debris stuck somewhere inside? I don't have hybrids so I cant really comment on the latter. Hope u get it fixed soon!

RE: TSi3 CG track & surefit hosel screws

jeff p — Tue, 06 Apr 2021 16:47:46 GMT

I noticed yesterday that I have a rattle or vibration in the "CG track" system of mine. If I could figure out how to change the weight, I would pull the current one and figure out a way to dampen the vibration. I've had my TSi3 driver weighting system completely apart(added a 2nd weight), but can not get the hybrid's apart.

RE: TSi3 CG track & surefit hosel screws

J22abe — Fri, 02 Apr 2021 21:33:56 GMT

You probably aren't making sure the screw driver is all the way set into the screw before turning and torqueing it.