Driver Surefit adapter compatibility

Follow Thread

By KyongHwan K

  • 0 Likes
  • 19 Replies
  1. KyongHwan K

    KyongHwan K
    REDMOND, WA

    I have a 910 D2 driver and I'm thinking of upgrading to TS2. Can someone confirm whether 910 D2 Surefit adapter will fit to TS2 driver?

    Thanks, Kyong

  2. Bomber3

    Bomber3
    Lake St Louis, MO

    Military
    Yes it will. The driver surfit adapter is the same for the 910 series through the TS series. Fairways and hybrids are a different story.
  3. Dale V

    Dale V
    Surprise AZ

    Yes, all the drivers still are compatible and of course, most of the weighting ports are different. That said, you may not get optimum results from your old shaft as the changes in the head are a bit different and newer shafts have newer technology. Might be worth doing a full fitting instead of taking a chance on a driver/shaft combo you have not tested.
  4. KyongHwan K

    KyongHwan K
    REDMOND, WA

    Thanks for your advice, Dale V.

    I went Titleist demo day for short fitting session and TS2 with HZRDUS Smoke 6.0 60g was producing best result, however, I still like my old 910 D2 driver (with Kai'll 60 x5ct stiff shaft) which fitted several years ago but I want to put HZRDUS Smoke 6.0 60g on the 910 D2 head to see if it works better since HZRDUS Smoke is supposed to be low spin.
  5. No'l

    No'l
    Palmdale, CA

    Dale V said:

    Yes, all the drivers still are compatible and of course, most of the weighting ports are different. That said, you may not get optimum results from your old shaft as the changes in the head are a bit different and newer shafts have newer technology. Might be worth doing a full fitting instead of taking a chance on a driver/shaft combo you have not tested.

    Brilliant response and knowledge, Dale!

    Taking it another step, are TS and TSi Surefit adaptors compatible?
  6. Dale V

    Dale V
    Surprise AZ

    Yep, absolutely. Driver shafts are still is interchangeable between TS and TSi. Same goes for fairways and hybrids.
  7. KyongHwan K

    KyongHwan K
    REDMOND, WA

    Found the answer at www.titleist.com/.../surefit

    IMPORTANT NOTES

    - TS, 917, 915, 913 and 910 driver shafts are interchangeable.
    - TS, 917, 915 and 913 fairway shafts are interchangeable.
    - Titleist Driver & Fairway SureFit Hosels adjust in .75° loft and lie increments.
    - Titleist Hybrid SureFit Hosels adjust in 1° loft and lie increments.
  8. Chuck Z

    Chuck Z
    Mt Pleasant, SC

    Military
    Not all hybrid models adjust in 1 degree increments.
  9. I wouldn't hesitate to mix and match with drivers (I just changed from a 917D2 head to a TS2 with my HZRDUS Black and no issues). Hybrids are a different story, I think they are more specialized.
  10. Is the fairway TSi2 wood shaft adapter the same one used in the Driver? Are the shaft adapters unique to driver and another model for fairways or are they the same?
  11. I believe the TSi2 adapters for driver and fairway are the same.
  12. Don O

    Don O
    Madison, WI

    The drivers and fairways have not shared the Sure-Fit through the TS line. The adapter is smaller with the fairway head. Compatibility with the TSi line would be an unexpected break in the releases. Weights are different- it is necessary to check the catalog as some cross between lines
  13. Jit N

    Jit N
    Pudsey, 0

    I have a 910 - TS Driver Shaft Adaptor will it fit the TSi Driver Head ??

  14. Bomber3

    Bomber3
    Lake St Louis, MO

    Military
    Yes! The driver adapter has been the same from the 910 series through TSi series.
  15. so my diamana s62+ shaft will accept the TS3 head ?
  16. Bomber3

    Bomber3
    Lake St Louis, MO

    Military
    If your shaft has a Titleist driver adapter installed it will work with any Titleist driver head from the 910s - TSi's.
  17. Don O

    Don O
    Madison, WI

    ALL Titleist drivers ( 910 - TSi ) can interchange shafts with the driver SureFit adapter.
  18. Bomber3

    Bomber3
    Lake St Louis, MO

    Military
    If it has a Titleist driver adapter installed, yes!
  19. bill c

    bill c
    windermere, FL

    I have a TM sim shaft that I want to change adapters to fit a TSi3 driver, are the adapters the same diameter?
  20. Barry M

    Barry M
    Reno, NV

    The shaft diameter is the same but you need to get a Titleist tip.

Please login to post a comment.

Sign In

Haven't registered for Team Titleist yet?

Sign Up